Sun Hydraulics Cartridge Valve Cabglhn Tro 30-35 Lbf FT/41-47 Nm

• Temperature: Ordinary Temperature
• Certification: GS, CE, ISO9001
• Media: Gas, Oil
• Standard: Standard
• Connection Mode: Internal Thread
• Power: Hydraulic
• Model NO.: CABG-LHN
• Material: Stainless Steel
• Type: Self-Operated
• Transport Package: Standard Package
• Specification: Standard
• Trademark: SUN
• Origin: China

Product Description

Sun Hydraulics Cartridge Valve CABGLHN TRO 30-35 Lbf FT/41-47 Nm

 

Atmospherically vented counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Backpressure at port 2 does not affect the valve setting because the spring chamber is atmospherically referenced.

Other names for this valve include motion control valve and over-center valve.

• Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
• Turn adjustment clockwise to decrease setting and release load.
• Full clockwise setting is 200 psi (14 bar).
• Free-flow check capacity (port 2 to port 1) is equivalent to the CAC* and CWC* models but the piloted-open flow capacity (port 1 to port 2) is reduced. See performance curve.
• All 3-port counterbalance and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size), however, the model CABG has a reduced overall length, allowing for easier packaging.
• Approximately 1 drop (0,07 cc) of fluid will pass from the pilot area to the vented spring chamber every 4000 cycles.
• Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
• Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
• This valve has positive seals between all ports.
• With vented valves, a lower pilot ratio may be required to achieve machine stability compared to non-vented valves.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

 

Other Models:

CXBA-XCN	CXDA-XCN	CXFA-XCN	CXHA-XCN
CXED-XCN	CXCD-XCN	CXAD-XCN	CXJA-XCN
CXGD-XCN	CNCC-XCN	CXAE-XCN	CXCE-XCN
CXEE-XCN	CNAD-XCN	RPCC-LAN	RPEC-LAN
RPGC-LAN	RPIC-LAN	RPEE-LAN	RPGE-LAN
RPIE-LAN	RDDA-LAN	RDBA-LAN	RVCD-LAN
RDFA-LAN	RDHA-LAN	RBAC-LAN	RBAA-LAN
PBBB-LAN	PBDB-LAN	PBFB-LAN	PBHB-LAN