Ppdb-Ldn Series Hot Sale Sun Hydraulic High Pressure Relieving Valve

• Customization: Available
• Temperature: Ordinary Temperature
• Certification: GS, CE, ISO9001
• Model NO.: PPDB-LDN
• Media: Gas, Oil
• Standard: Standard
• Connection Mode: Internal Thread
• Power: Hydraulic
• Material: Stainless Steel
• Type: Self-Operated
• Transport Package: Standard Package
• Specification: Standard
• Trademark: SUN
• Origin: China

Product Description

PPDB-LDN Series Hot Sale Sun Hydraulic High Pressure Relieving Valve 

 

Pilot-operated, pressure reducing/relieving valves reduce a high primary pressure at the inlet (port 2) to a constant reduced pressure at port 1, with a full-flow relief function from port 1 to tank (port 3).

• Full reverse flow from reduced pressure (port 1) to inlet (port 2) may cause the main spool to close. If reverse free flow is required in the circuit, consider adding a separate check valve to the circuit.
• If pilot flow consumption is critical, consider using direct acting reducing/relieving valves.
• Recommended maximum inlet pressure is determined by the adjustment range. Ranges D, E, N, and Q are tested with a 2000 psi (140 bar) maximum differential between inlet and reduced pressure. Ranges A, B, and H are tested with a 3000 psi (210 bar) maximum differential between inlet and reduced pressure. Ranges C and W are tested with 5000 psi (350 bar) of inlet pressure.
• Pilot operated valves exhibit exceptionally flat pressure/flow characteristics, are very stable and have low hysteresis.
• Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
• Pilot operated reducing, reducing/relieving valves by nature are not fast acting valves. For superior dynamic response, consider direct acting valves.
• W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
• Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
• All three-port pressure reducing and reducing/relieving cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size). When considering mounting configurations, it is sometimes recommended that a full capacity return line (port 3) be used with reducing/relieving cartridges.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

 

Other Models:

CXBA-XCN	CXDA-XCN	CXFA-XCN	CXHA-XCN
CXED-XCN	CXCD-XCN	CXAD-XCN	CXJA-XCN
CXGD-XCN	CNCC-XCN	CXAE-XCN	CXCE-XCN
CXEE-XCN	CNAD-XCN	RPCC-LAN	RPEC-LAN
RPGC-LAN	RPIC-LAN	RPEE-LAN	RPGE-LAN
RPIE-LAN	RDDA-LAN	RDBA-LAN	RVCD-LAN
RDFA-LAN	RDHA-LAN	RBAC-LAN	RBAA-LAN
PBBB-LAN	PBDB-LAN	PBFB-LAN	PBHB-LAN