Great Price Sun Hydraulic Cbbl-Ljn Series Counterbalance Valve

• Temperature: Ordinary Temperature
• Certification: GS, CE, ISO9001
• Media: Gas, Oil
• Standard: Standard
• Connection Mode: Internal Thread
• Power: Hydraulic
• Model NO.: CBBL-LJN
• Material: Stainless Steel
• Type: Self-Operated
• Transport Package: Standard Package
• Specification: Standard
• Trademark: SUN
• Origin: China

Product Description

Great Price Sun Hydraulic CBBL-LJN Series Counterbalance Valve

 

Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.

Other names for this valve include motion control valve and over-center valve.

• Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
• Turn adjustment clockwise to decrease setting and release load.
• Full clockwise setting is less than 200 psi (14 bar).
• Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.
• Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
• Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
• Two check valve cracking pressures are available. Use the 25 psi (1,7 bar) check unless actuator cavitation is a concern.
• This valve has positive seals between all ports.
• All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
• Corrosion-resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
• Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

 

Other Models:

CXBA-XCN	CXDA-XCN	CXFA-XCN	CXHA-XCN
CXED-XCN	CXCD-XCN	CXAD-XCN	CXJA-XCN
CXGD-XCN	CNCC-XCN	CXAE-XCN	CXCE-XCN
CXEE-XCN	CNAD-XCN	RPCC-LAN	RPEC-LAN
RPGC-LAN	RPIC-LAN	RPEE-LAN	RPGE-LAN
RPIE-LAN	RDDA-LAN	RDBA-LAN	RVCD-LAN
RDFA-LAN	RDHA-LAN	RBAC-LAN	RBAA-LAN
PBBB-LAN	PBDB-LAN	PBFB-LAN	PBHB-LAN