Rexroth A15VLO is designed for stationary applications such as tooling machines. A15VLO is a variable pump with axial piston rotary group of swashplate design for hydrostatic drives in an open circuit hydraulic system. Flow is proportional to drive speed and displacement. The flow can be smoothly changed using the control (cradle) . For axial piston units with swashplate design, the pistons are arranged axially relative to the drive shaft. Rexroth A15VLO variable pumps are currently approved for operation with mineral oil. The axial piston variable pump generates, controls and regulates a hydraulic fluid flow. In an open circuit, the hydraulic fluid flows from the reservoir to the hydraulic pump from where it is fed to the consumer, e.g. hydraulic motor.
Rexroth Piston Pump A15VLO Features
- Variable axial piston pump of swashplate design for hydrostatic drives in open circuit.
- For use preferably in stationary applications.
- The flow is proportional to the drive speed and displacement.
- The flow can be infi nitely varied by adjusting the swashplate angle.
- The pump can work either self-priming or with a charge pump.
- A wide range of highly adaptable control devices with diff erent control and regulating functions for stationary applications.
- 100% mooring function possible depending on specific controller (swivel mode, operation as a motor).
- The universal through drive is suitable for adding gear pumps and axial piston pumps up to the same size, i.e. 100% through drive.
- Compact design
- High efficiency
- High power density
- Low noise level
- Sizes 110 to 280, as A15VSO110, A15VSO145, A15VSO175, A15VSO210, A15VSO280, A15VLO145, A15VLO175, A15VLO210, A15VLO280
- Nominal pressure 5100 psi (350 bar)
- Maximum pressure 6100 psi (420 bar)
- Open circuit
Audited Supplier 
){kind=link}
){kind=link}